机械留学申请范文,机械工程留学申请攻略

留学资讯2023-12-15 04:30:02嘉佳老师

  编辑已为您准备好了“机械工程专业留学申请书”全套,请查收。在我国服务体系建设日益进步的今天,申请书的应用场景越发多样化,我们需要在正确的场合运用该技能。您是否曾经为撰写一份合适的申请书而感到苦恼呢?希望您能参考阅读本文,获得所需的帮助!

机械工程专业留学申请书【篇1】

  Dear _,

  I have always enjoyed studying Maths, Physics and Chemistry, and I would like the opportunity to continue this study. Chemical Engineering appeals to me because of the challenges involved in the application of scientific theory to practical, real world problems such as how to deal with nuclear waste. I particularly look forward to studying fluid dynamics as I was introduced to this during the Engineering Education Scheme (EES). I am aware that in today’s world chemical engineering has an increasingly important role across a wide range of industries from pharmaceuticals to petrochemicals. The broad range of career paths, and the opportunity to contribute to society through technological innovation, is for me, one of the main attractions of chemical engineering.

  I have applied to take part in the Year In Industry scheme during which I hope to gain practical experience, as well as greater maturity enabling me to go into my degree course with improved skills and broader experience. I also hope to study e-learning courses on project management and presentation skills run by the IChemE. In Year 12 I took part in the EES, which improved my understanding and skills in team working, time management, and report writing, as well as visual and oral presentation. Throughout the course of the project the team had to frequently correspond with mentors in industry and academia and this experience has broadened my appreciation of practice and application in a real life situation. In July I attended a week-long ‘Into Engineering’ seminar run by REACT Engineering. Working in two teams, we were given a design exercise based upon a typical decommissioning project. I also attended a Headstart course at Newcastle University, which I thoroughly enjoyed. One of the main activities was to design, manufacture and test a small crane. I found both of these experiences very challenging, as we were given only limited time so we had to prioritise our tasks and carefully plan our work.This year a fellow student and I were awarded £500 by the European Scholarship Prize to fund a visit to Prague to do research for our A-level History coursework. I gained an understanding of the city’s culture and history and further developed my independence. During the summer I represented my school on a Connexions review of a government white paper on 14-19 education. I gained an insight into the government’s proposals and learned a lot about working with different groups of people. Last year I was part of the editorial team for the school magazine. I wrote a number of articles and I was responsible for ensuring that staff contributions were ready for the deadline. I also enjoy participating in a range of sports and have represented the school at football and cricket, which has further enhanced my team working skills.In my spare time I am working towards my Duke of Edinburgh Gold Award. In September I completed a 4-day expedition in the Lake District, which tested my endurance but gave me a great sense of achievement. As part of the award I have been helping at the local youth café once a week, which I am really enjoying as it gives me the chance to meet new people. I also enjoy reading, particularly books on physics and Russian history. I am really interested in computers and I am currently trying to configure a Linux based file and print server for my home network.

  For admission to a university in England you have to fill in a form from the Universities and Colleges Admissions Service (UCAS). They for a very reasonable fee provide all applicants to unversities and colleges in the UK with a way to apply to up to 6 universities (or multiple courses at, say 3 universities). Part of the form (apart from all the obvious details such as name and address), is half a page where you are asked to write about yourself, your interests and so on. Inevitably you have to make it sound as good as possible, as you're trying to sell yourself to the universities you're applying to...I applied to the universities of Aston, Bath, Bristol, Cambridge, Imperial College London, and Loughborough. All for an MEng (Master of Engineering degree) in Chemical Engineering, except for Bristol where I went for an MEng in Computer Science, so this is tailored towards those courses. Anyway... Here it is. I don't guarantee that you won't get bored! ;-). (NB this was written in the summer of 1999, and is therefore not too current!).Reasons for Course Choice

  Since beginning secondary school, I've been very interested in Chemistry and Computing. Besides my normal schoolwork I've read around these two subjects. Because I am also very keen on Mathematics and Physics, I want to pursue a degree course that combines all or most of these. Both of my parents are Science/Engineering graduates and they have taught me some of the qualities needed for a degree course in this field. This has encouraged me to find out about the opportunities available. Aims

  I have applied to several firms for sponsorship while at university and during a gap year, with the intention of getting Engineering-related work experience. This would give me valuable experience for the course at university. I hope to obtain a Master of Engineering degree and become employed in research and development in the oil or food industry. Eventually, I would like to do postgraduate study, and perhaps even teach Chemistry/Engineering. Interests

  I play basketball, tennis, volleyball, and I like kayaking. By far my biggest sports interest, however, is orienteering. I've won several trophies for Andalusian and league championships, and I've helped to organise regional orienteering events. I have also designed the database system for my club. My greatest interest outside school is computing. I have done a large amount of web design. I help maintain the computer systems at my father's workplace; and I also do some part time work teaching people on a one-to-one basis how to use their computers. I like writing manuals or “notes” on things related to computers, and have published an article on web design in a small US computer magazine. I have written papers on the use of data-logging and other equipment for my school's science department. This year, I was responsible for laying out my school's entire yearbook using DTP software. Recently, I was employed developing a web site and training staff for an organisation in London. When I have time I play the keyboard, and also do some sound engineering: I used to operate the mixing desk at my local church, as well as help at my parents' workplace, which is a professional recording studio. I enjoy teaching and have given weekly tuition in Maths and English. General Points

  I've lived in Spain for 14 years and am fluent in Spanish. In addition, my parents work with North Africans, Middle Easterners, Americans, Spaniards, Britons, and people of other nationalities. I have gained valuable experience growing up with many different cultures around me, and as a result appreciate the difficulties of cross-cultural communication. I have been part of several “King's Kids”, teams which perform music and dance all over Spain. This entailed travelling away from home for 3 weeks at a time, and having to work with around 60 other people. I think that this has made me a fairly rounded person, and I therefore feel confident about “fitting in” with people from any culture.

  首先应该具备良好的英文听说能力,可以很好地跟当地人进行交流,这样会使自己更加迅速的融入到当地的生活中。其次要具备良好地英文阅读能力,因为有很多时候是我们自己独处的,所以有很多不明白的东西我们可以自己买来查一查,这样也让自己对当地的生活环境、文化环境有更进一步的了解,这是最为首要的去澳洲留学的条件。

  因为需要对自己的留学国家、留学专业做出规划,并且要获取大量与此相关的信息,并能确保其信息准确、全面,需要花费大量的时间精力。如果学生选择留学国家及学校时仅仅通过简单地网上信息搜集或亲人、朋友的推荐,很可能在自己正式进入学校就读时却发现所学的专业及选择的学校并不适合自己。澳洲留学条件要求如果自己打算办签证的同学,还必须了解一些的签证政策。

  对于留学一定要对自己有一个清醒而又正确的认识。充分认识自己的兴趣爱好,自己的擅长的地方和自己不擅长的地方。尤其是在选择学校的时候,不要只看学校的排名和奖学金,只看学校的热门专业,一定要根据自己的实际情况选好契合自己的专业与学校,不要为了出国而出国,甚至为了进入而造假,这样不利于自己以后的发展,这是容易被学生们忽略的一大澳洲留学条件。

  出国留学涉及的手续复杂、程序繁琐,涉及到多个环节,并不是所有问题都可以在网上找到答案。需要申请人具有较强沟通、解决问题的能力。缺乏申请留学经验的学生一定要特别注意把握一些细节上的问题,如果哪个细节出现状况,整个申请过程就可能功亏一篑。不了解该澳洲留学条件而一旦申请人有拒签记录,下次签证的难度就会大大增加。

  在选择专业时,你也应该多少考虑到未来30年里你会做什么样的工作。要想拥有成功的事业,你必须选择你喜爱的以及擅长的工作。因此,选择你感兴趣的以及适合你的专业尤为重要。切记不可选择一个你根本就不喜欢的专业。

  语言环境是你选择专业时应考虑的另一个重要的因素。大部分中国大陆学生选择在澳洲学习商科,工科以及IT领域。这主要是因为他们认为这些专业的毕业生需求量大而且所从事职业大多属于高收入阶层。

  学习这些专业的问题在于大部分中国大陆学生和你所见略同,所以你所在班级会有大部分中国学生,尤其是在一些大学里,这种情况尤为普遍。结果,你就不会有一个纯正的英语学习环境,因为你会和他们一起学习。

  而对于留学生来说,英语差意味着低分,缺乏和更多学生团体的互动,孤独感徒增,知识面窄。这些最终会影响学习效果,使你在留学中所获不多。总之,如果你想和更多的澳洲人或者是非亚洲人一起学习从而更好的练习英语,你就应该选择一个中国学生申请不多的专业。

  在选择专业时,你需要对所选专业的入学要求多加考虑。一些专业如医学等很难申请。有些专业如工科要求你预先学习一些相关课程。因此,选择专业时,你必须考虑到你的学术历史及先前的学习。

  选择专业的另一个重要因素就是你该考虑到你所接受教育的特殊性。也就是说,专才专业包括保险精算学,土木工程,而商务管理或者是市场营销则隶属于通才专业。

  专才教育的优势在于它可以使你具备从事特殊职业的资格,因此在就业的时候,你会有很多选择。然而,如果你不愿从事那些领域的工作,专才教育同时也会在某种程度上限制你的选择。而通才文凭将会使你在确定职业方向时难上加难,因为你没有任何专门培训及技术知识。然而,你将会有更广阔选择工作范围。

  移民是学生选择留学专业时考虑的因素之一。在澳洲,如果你能够在“技术移民紧缺职业清单”所列的任何领域取得一个文凭的话,移民部门会给你的永久居住申请额外加15分。这些紧缺职业涉及到会计学,健康科学,工科以及贸易等领域。因此,很多中国学生决定学习会计学。除此之外,那些列在技术职业清单上的职业也会有额外加分。

  尽管可以参照以上清单来考虑专业,但是还是会有风险存在。首先,根据现在的情况来考虑未来本身就很冒险。先前,IT行业列于技术移民紧缺职业清单之上。然而就在最近,由于澳洲市场IT人才供大于求,所以这一行业已从清单上清除。同样,也许在二到三年里,你会发现会计师将不在列于清单之上。其次,如果你从未涉足该领域,在学习中,你可能会发现你不喜欢会计学或者你可能会觉得自己不适合这个职业。

  这样的话,在毕业时你会受到限制,因为你会发现尽管有会计学文凭,想要在你感兴趣的行业找到工作你也会受到很多限制。无论是何种原因,你都不再希望移民澳洲。这样的话,你可能会选择一个不相关的领域去学习。

  也有相当多的学生在选择专业时以就业机会为动机。显然,你这样做是为了得到更大的回报。你希望在澳洲或者中国尽快找到一个高收入的工作。

  首先你该考虑的是你对何种职业更感兴趣。其次,由于澳洲与中国对于不同职业的就业需求以及就业前景完全不同。所以你应该了解澳洲与中国对于不同职业的就业需求数据,以此确定未来的发展方向。如果你想有更多的选择,建议你同时关注两个就业市场。

  考虑到就业机会的时候,你也应该考虑一下你的文凭是否具有独特性。在选择澳洲热门专业时,你可以选择一个独特新颖的领域,这样会让你与众不同。

  很多中国学生学习一般商科专业,如商务管理,市场营销或者是国际贸易,因此他们没有竞争优势。其实,有很多专业可供选择,例如保险精算学,酒店管理,电子商务,创新管理或者工程管理。

  正如所提及的,当你以现在的趋势为选择基础时,你应当格外慎重。当前的就业趋势是不断变化的,所以当你以当前来衡量未来时往往会冒一定的风险。

机械工程专业留学申请书【篇2】

  Dear _,

  An experienced engineer of security printing with China’s Central Bank, I now would like to scale higher intellectual heights by pursuing Ph. D. studies in mechanical engineering at your university. I believe that my strong background in CAD has adequately prepared me to embark on this endeavor.

  I have been working since 1996 for the People’s Bank of China, a Chinese version of the Federal Reserve, at its unique research institute of security printing, with the responsibility of designing the Chinese currency and the machinery to produce it. By engaging me in a variety of projects, the job afforded me ample exposure to cutting-edge developments in computer technologies, particularly in CAD software. I have, for example, recently redeveloped a purchased CAD (Computer Aided Design) software to make it more suitable for our own purposes. By adding our own part/subassembly to the database and make our own drawing criteria, we have achieved dramatically better efficiency.

  My job performance, which has won me professional respect from all of my colleagues, was achieved thanks to the strong background I acquired as a student in computer science. My undergraduate GPA ranked first among the 63 students of classmates in mechanical department, for which I was awarded first-class and second-class prizes many times. My graduate GPA ranked among the top 4% of the 105 students in my year, which won me the “San Hao” scholarship every year during the three years of my graduate studies.

  Unlike many other Chinese students, who are content with performing well in exams, I made a point of learning through my own hands-on experiences. In the Master’s program at the Beijing Institute of Printing, I gained an in-depth understanding of artificial intelligence, including expert system and genetic algorithm, especially in neural network. For my thesis, I programmed a multi-level BP neural network with C language to analyze my mathematical model, and applied much of my knowledge in optimization. I thus became able to program with a host of different computer languages, especially C++, with which I helped my graduate advisor to design a paper-cutting machine. To analyze the mechanism statically and dynamically, I programmed a software system to analyze and emulate it on screen. In undergraduate studies, I had often programmed with Fortran77 and the Basic language.

  Upon the completion of my Master’s studies, I easily passed the doctoral record examination in CAD/CAM of Beijing University, one f the top universities in China. But I gave up the opportunity in order to gain more practical experience in the industry. The decision proved to be right, as it guaranteed me better access to sophisticated facilities, such as state-of-the-art personal computers. With the People’s Bank of China, I have thus accumulated solid expertise in many kinds of operating and application software systems, particularly in CAD. I now have a firm grip on the latest developments in computer science in China.

  The challenges I met and the successes I achieved at the People’s Bank have not only endowed me with confidence but also fired off my desire to further improve myself. I have enjoyed high-quality and efficient production with the use of a kind of PC-based CAD software, MDT, developed by Autodesk Corporation. I now have a dream: some day, every person can design his favorite product with some sort of CAD software, and then search for an ideal factory over high-speed internet its production; and the factory will put specifications of the product, as it has received them via the high-speed internet into its CIMS, and out pops the product, as designed, at the end of the factory’s production line. It is a beautiful dream for every engineer, but many difficulties the speed of data-transfer and how to manage the product data among CAD, CAM, CAPP and CAE systems. These questions are fascinating, and I would like to come up with my own answers to them.

  To prepare myself for advanced studies in your country, I have persisted in improving my English proficiency. As demonstrated by my score of 700 (96%) in the verbal section of GRE, I now have an adequate command of English for undertaking graduate studies in your program.

  After carefully comparing the strengths of many universities, I find Mercy University particularly suited for my purpose. It has got the best combination of quality faculty, many state-of-the-art facilities, and an intriguing academic environment. Currently, China still lags significantly behind Western countries in mechanical engineering. I hope that, with a few years of graduate studies under your seasoned guidance, I will be able to return to my motherland and help bring mechanical engineering in my country to international standards.

  Although my ultimate objective is a Ph. D. degree, I am willing to do a Master’s degree if necessary. In either case, I would like to concentrate my studies in one or a combination of the following areas: CAD, CAM, CIMS, Computer graphics, Mechanical design, Mechanical manufacturing, Optimization, Artificial intelligence, and Robotics. Your favorable evaluation of my application will be highly appreciated.

  悉尼全年都是日照充足的地中海气候,每年都超过340天为晴天,夏季平均温度26℃,较潮湿;冬季平均气温16℃。

  夏季(12月-2月):夏季往往是悉尼最热的时候,尤其是1月,这也是澳洲人喜欢度假的时候,沙滩也成了澳洲人的聚集地,例如悉尼的Manly沙滩,Bondi沙滩。另外,这期间还有澳洲的新年,海港大桥的新年烟火秀也是不能错过的活动。

  秋季(3月-5月):秋天比较温暖,是全年最适宜旅游的季节之一,适合徒步旅行或者爬山。

  冬季(6月-8月):冬季最冷的是7月,一般不会太冷,但有时候也有低温天气,温度到6-7℃,甚至还有接近零度的时候。

  春天(9月-11月):春天的悉尼生机勃勃,天气渐渐温暖,但温度没有夏季那么高,日间气温大概是11-23℃左右。

  悉尼被评为世界最宜居城市之一,适宜的气候占了很大的功劳。不管是来留学,还是工作,还是选择移民,悉尼都是一座完美的选择~

  悉尼作为澳洲极大的城市,也是澳大利亚的经济中心,自然也是澳洲就业机会最多的地方。不管是留学期间找兼职、实习,还是毕业之后找工作,悉尼都是机会最多的地方,尤其是对于学商科的学生。而去澳洲的留学生中,有超过一半的就选择商科,这也是为什么留学生扎堆悉尼的重要原因。

  悉尼聚集了来自世界各地的人,不管是留学生、移民、游客,这也就意味着你能找到来自同一个国家的小伙伴,也能交到来自不同文化背景的朋友。另外,多元化还意味着,你在悉尼永远不会无聊,永远会有各种精彩的活动,例如在我大天朝的春节时,悉尼也会有大型的庆祝活动,庆祝游 行,烟火等等。

  澳大利亚国土辽阔,是世界国土面积第六大的国家,也就意味着有大批颜值在线的景点等着你去探索!从澳洲国宝级景点大堡礁,到大大小小的沙滩,再到世界上最干净的地方塔斯马尼亚州,从悉尼连接着澳洲的各处风景。

  1)在悉尼塔龙加动物园(Taronga Zoo)与动物们亲密接触。从环形码头(Circular Quay)乘坐渡轮去动物朋友们居住的水滨家园塔龙加动物园看望它们。这座动物园里生活了2,900多种外来及本土动物,包括大猩猩、老虎、豹子、黑猩猩、长颈鹿、袋鼠和考拉。

  2)悉尼歌剧院(Sydney Opera House)。沿着环形码头漫步,寻找悉尼歌剧院永不褪色的秘密。丰富多样、日程紧凑的演出计划让歌剧院成为悉尼最繁忙的音乐、艺术和表演场馆之一。参加幕后之旅(Backstage Tour),了解歌剧院背后的工作机制。这类游览活动信息量丰富,且有包括日语、普通话和法语等多种语言讲解。

  3)攀登悉尼海港大桥(Sydney Harbour Bridge)。于1932年竣工的悉尼海港大桥被亲切的称为衣架(The Coathanger),是一座名副其实的工程杰作。游客可自由地在这座横跨悉尼海港(Sydney Harbour)的宏伟建筑上漫步或骑自行车。而攀爬大桥体验则能够将你的乐趣提升到新的高度,悉尼大桥攀登公司(Bridge Climb)提供众多攀登项目,无需特别的攀登技巧就能爬上桥身,还有黎明与黄昏攀登计划可供选择。

  最后,就是留学党来悉尼最重要的一个原因了。中国的留学生,除了偏爱商科之外,也偏爱澳洲名气极大的八大院校,而其中,有两所就在悉尼:澳洲第1所大学悉尼大学,以及就业较好的新南威尔士大学。

  悉尼大学(The University of Sydney),始建于1850年,是坐落于南半球金融、贸易与旅游中心——澳大利亚新南威尔士州首府悉尼的世界顶尖研究型大学。悉尼大学是全澳历史最悠久的大学,是整个南半球的学术殿堂和全球知名的高等学府。

  新南威尔士大学曾被欧洲权威杂志Spear‘s评为澳洲大学中最盛产百万富翁的学校。这可不是空穴来风,根据数据公司Wealth-X的统计,在全球大学毕业生超过3000万美元身价的校友样本中,新南威尔士大学毕业的估计超高净值校有575位,是澳洲大学中人数超多的。

  除此之外,以商科著称的麦考瑞大学,世界排名Top200的悉尼科技大学、西悉尼大学都是不错的选择。

  衣服有季节性的差异,夏天的衣服轻薄,虽然相对便宜,但是大家购买的频率也会更高一些,而且大部分的衣服是季抛,很少会穿到第二年。

  而冬天的衣服则要相对好一些,一件质量好的衣服甚至可以陪伴你度过整个留学生涯,但是即便是这样,大家还是需要做好购物的规划,尽量选择一些物美价廉的衣服,这样才能保证自己一年的开支不超过澳元。

  在平均物价不低的澳洲留学,不管是在那一座城市,吃饭这件事都不算便宜,在学校可能会相对划算一点,但是总是吃食堂肯定会不习惯的。

  所以大家不妨考虑一下自己做饭吃,只要条件允许,大家可以自己在超市或者市场内购买食材,然后开火做饭,这样一年的总开支会节省不少,5000澳元就足够了。

  如果大家的预算有限的话,建议还是以学校住宿为主,虽然环境比较简单,只有基础的家居,但是在安全上保障还是比较高的,并且性价比非常高,一年1万澳元绰绰有余。

  租房的住宿环境会好很多,单词额会更高,最关键是大家可以拥有独立的住宿空间,即便是合租也会有单独的卧室,不过价格就要贵上不少了,每年至少要比住校翻一倍。

  地广人稀的澳大利亚,大家日常的出行,如果仅仅靠自己的双脚肯定是不够的,如果不出远门,可以考虑买一辆自行车,但是如果每天都要出行,那么就建议大家选择公共的交通工具。

  乘坐公交或者地铁,可以考虑办理公交卡,可以享受刷卡折扣优惠,这样每年的开支在500澳元左右。

机械工程专业留学申请书【篇3】

  Dear _,

  I have always enjoyed studying Maths, Physics and Chemistry, and I would like the opportunity to continue this study. Chemical Engineering appeals to me because of the challenges involved in the application of scientific theory to practical, real world problems such as how to deal with nuclear waste. I particularly look forward to studying fluid dynamics as I was introduced to this during the Engineering Education Scheme (EES). I am aware that in today’s world chemical engineering has an increasingly important role across a wide range of industries from pharmaceuticals to petrochemicals. The broad range of career paths, and the opportunity to contribute to society through technological innovation, is for me, one of the main attractions of chemical engineering.

  I have applied to take part in the Year In Industry scheme during which I hope to gain practical experience, as well as greater maturity enabling me to go into my degree course with improved skills and broader experience. I also hope to study e-learning courses on project management and presentation skills run by the IChemE. In Year 12 I took part in the EES, which improved my understanding and skills in team working, time management, and report writing, as well as visual and oral presentation. Throughout the course of the project the team had to frequently correspond with mentors in industry and academia and this experience has broadened my appreciation of practice and application in a real life situation. In July I attended a week-long ‘Into Engineering’ seminar run by REACT Engineering. Working in two teams, we were given a design exercise based upon a typical decommissioning project. I also attended a Headstart course at Newcastle University, which I thoroughly enjoyed. One of the main activities was to design, manufacture and test a small crane. I found both of these experiences very challenging, as we were given only limited time so we had to prioritise our tasks and carefully plan our work.This year a fellow student and I were awarded £500 by the European Scholarship Prize to fund a visit to Prague to do research for our A-level History coursework. I gained an understanding of the city’s culture and history and further developed my independence. During the summer I represented my school on a Connexions review of a government white paper on 14-19 education. I gained an insight into the government’s proposals and learned a lot about working with different groups of people. Last year I was part of the editorial team for the school magazine. I wrote a number of articles and I was responsible for ensuring that staff contributions were ready for the deadline. I also enjoy participating in a range of sports and have represented the school at football and cricket, which has further enhanced my team working skills.In my spare time I am working towards my Duke of Edinburgh Gold Award. In September I completed a 4-day expedition in the Lake District, which tested my endurance but gave me a great sense of achievement. As part of the award I have been helping at the local youth café once a week, which I am really enjoying as it gives me the chance to meet new people. I also enjoy reading, particularly books on physics and Russian history. I am really interested in computers and I am currently trying to configure a Linux based file and print server for my home network.

  For admission to a university in England you have to fill in a form from the Universities and Colleges Admissions Service (UCAS). They for a very reasonable fee provide all applicants to unversities and colleges in the UK with a way to apply to up to 6 universities (or multiple courses at, say 3 universities). Part of the form (apart from all the obvious details such as name and address), is half a page where you are asked to write about yourself, your interests and so on. Inevitably you have to make it sound as good as possible, as you're trying to sell yourself to the universities you're applying to...I applied to the universities of Aston, Bath, Bristol, Cambridge, Imperial College London, and Loughborough. All for an MEng (Master of Engineering degree) in Chemical Engineering, except for Bristol where I went for an MEng in Computer Science, so this is tailored towards those courses. Anyway... Here it is. I don't guarantee that you won't get bored! ;-). (NB this was written in the summer of , and is therefore not too current!).Reasons for Course Choice

  Since beginning secondary school, I've been very interested in Chemistry and Computing. Besides my normal schoolwork I've read around these two subjects. Because I am also very keen on Mathematics and Physics, I want to pursue a degree course that combines all or most of these. Both of my parents are Science/Engineering graduates and they have taught me some of the qualities needed for a degree course in this field. This has encouraged me to find out about the opportunities available. Aims

  I have applied to several firms for sponsorship while at university and during a gap year, with the intention of getting Engineering-related work experience. This would give me valuable experience for the course at university. I hope to obtain a Master of Engineering degree and become employed in research and development in the oil or food industry. Eventually, I would like to do postgraduate study, and perhaps even teach Chemistry/Engineering. Interests

  I play basketball, tennis, volleyball, and I like kayaking. By far my biggest sports interest, however, is orienteering. I've won several trophies for Andalusian and league championships, and I've helped to organise regional orienteering events. I have also designed the database system for my club. My greatest interest outside school is computing. I have done a large amount of web design. I help maintain the computer systems at my father's workplace; and I also do some part time work teaching people on a one-to-one basis how to use their computers. I like writing manuals or “notes” on things related to computers, and have published an article on web design in a small US computer magazine. I have written papers on the use of data-logging and other equipment for my school's science department. This year, I was responsible for laying out my school's entire yearbook using DTP software. Recently, I was employed developing a web site and training staff for an organisation in London. When I have time I play the keyboard, and also do some sound engineering: I used to operate the mixing desk at my local church, as well as help at my parents' workplace, which is a professional recording studio. I enjoy teaching and have given weekly tuition in Maths and English. General Points

  I've lived in Spain for 14 years and am fluent in Spanish. In addition, my parents work with North Africans, Middle Easterners, Americans, Spaniards, Britons, and people of other nationalities. I have gained valuable experience growing up with many different cultures around me, and as a result appreciate the difficulties of cross-cultural communication. I have been part of several “King's Kids”, teams which perform music and dance all over Spain. This entailed travelling away from home for 3 weeks at a time, and having to work with around 60 other people. I think that this has made me a fairly rounded person, and I therefore feel confident about “fitting in” with people from any culture.

  Yours sincerely,

  shenqing/

  不管是网络面试还是电话面试,毕竟教授并不是坐在大家面前,大家可以采取一些小技巧,比方说小纸条等来应对。

  但是,如果是面对面的话,这就意味着大家之前的那些小技巧完全没有用武之地了。除了踏踏实实的练习口语之外,没有别的办法。当然,面试之前也可以事先询问一下教授是否会英语,实在不行的话可以用英语来救急一下。

  日本是一个讲究礼尚往来的国家。如果大家能够在第一次跟教授见面的时候准备一点代表自己心意的小礼物,给教授一个惊喜,那就再好不过了。当然,需要注意的是,礼物尽量选的不要很贵重。太贵重的东西容易造成人情压力,日本人也不是很喜欢。

  3、除了带礼物之外,自己的形象也很重要。女生尽量化一下淡妆,男生也要尽量让自己显得阳光开朗,同时注意礼貌,争取给教授留下一个好印象。

  4、在面试的时候可以带一份自己的个人简历和计划书,可以帮助教授了解大家的具体情况。

  1、因为Skype支持视频通话,所以,在日本的教授完全可以看到学生的样子以及所处的环境。建议同学们选择一个相对安静舒适的环境,保持良好的形象,争取给教授留下一个好的第一印象。

  2、在正式的面试之前,同学们提前测试一下Skype软件,保证熟练使用,同时也测试一下网络状况,尽量不要出现声音延迟或者视频状况不好的现象。

  3、如果面试过程中网络确实非常不好,影响了面试,可以跟教授建议以电话的形式将面试继续进行下去。

  1、因为是国际长途,首先要跟教授确定好是谁打给谁——有的教授可能希望学生打 到日本去,这就需要学生提前开通手机国际通话的业务,同时准备充足的话费,保证在面试当天,通话能够顺利进行。

  2、在设备方面,需要学生注意的就是通话质量。不管大家是用座机或者手机跟日本方面通话,大家都要保证语音的质量,不要出现干扰现象,影响大家的面试。

  3、电话面试不需要跟教授面对面。相对而言,虽然可以缓解一下学生的紧张情绪,但这也导致大家无法根据教授的面部表情来猜测教授的意思,这对学生的听力提出了更高的要求。所以,同学们在应对这一类面试的时候一定提前练习一下听力。

  中国留学生的应试能力很强,往往在考试中可以得到很好的分数,但是在与人交流,尤其是和外国人的交流上缺乏经验,笔试成绩很好的考生因为面试太过糟糕而被淘汰这种情况时常发生,经历了艰苦的学习最后却倒在面试官面前,未免太可惜了。所以在面试前,充分的准备是很有必要的。

  赚钱无非是两种方式,打工和申请奖学金。

  政府对学生兼职的要求是比较宽松的,基本上只要大家愿意,就可以从事合法的工作,大家获取合法兼职的证明之后,只要能够保证不影响学习,一周可以工作最长28个小时。

  而可以选择的工作,除了违法犯罪和风俗产业之外,基本上只要能够通过招聘审核,就可以入职工作,对于大家兼职的权益,政府是有着完善的保障措施的,在薪资方面你不用担心被克扣和被骗。

  区分出有条件和无条件的项目,无条件奖学金一般是由学校进行发放的,大家可以直接通过自己的学术考试成绩进行申请,有些项目甚至不需要额外进行申请,只要符合要求会自动进行发放。

  有条件的项目一般奖金的额度会比较大,这里的条件是指大家在获奖之后要承担的义务,一般是工作的要求,需要在日本工作一段时间,或者去发奖的企业进行工作。

  留学生们可以从衣食住行着手,可以省钱的方面还是很多的。

  平时购物,不管是日用品还是衣服等,建议选择商场有折扣活动的时候去,而且记得办一张信用卡,刷卡可以享受一定的折扣,而且还可以积累积分,后续可以进行兑换。

  餐饮的安排建议选择食堂,或者自己做,一般住的地方都会有做饭的条件,大家买菜的成本也不高,会比去餐馆吃划算得多,而且也更符合自己的口味。

  再采购花钱之前,能够列一张清单,这样大家可以有目标的购物,降低乱花钱的可能性;其次需要将自己每天的花销记下来,一方面可以了解开支情况,另一方面能惊醒自己。

机械工程专业留学申请书【篇4】

  Dear _,

  Having a flair for Economics and accounting I have decided that I want a degree in Accounting and Finance or Management. The many brilliant representatives of the management community around the world have strengthened that resolve.

  When I worked in my school as a tutor of English as a Second Language for students from a community school in Muscat, I realized the importance of a strong leader who could organize, command respect, and be able to work well with others. These ideas were further enforced by my month long internship at Novartis Pharmaceutical (Accounts and Finance Department and Human Resources Department).

  I attended the Harvard Model Congress in Paris and won the Award of Distinction. One skill in particular that contributed to this award was my confident public speaking.

  The last 4 months have been crucial in my learning of real world business and economics. For my IB Extended Essay, titled “To What Extent Does Subway in Oman Operate as an Oligopoly”, I set out to prove the oligpolistic structure of the fast food market in Oman. In this effort, I have come across many real life complexities in pricing behaviour, profit making and other aspects of the Theory of the Firm. While attempting to explain these alternate theories of firms I have developed a keen interest in analyzing and understanding how the world of business works.

  After an undergraduate degree in accounting and finance or management I plan to go onto post graduate studies and work on an MBA. A strong performance in a BA will allow me to move onto an MBA and only then shall I be satisfied.

  For the last four years I have been part of our schools volleyball team ICE. We have retained our ISAC (Inter Schools Activities Conference, Middle East) title for four years. Playing in the power hitters (spiker) position requires immense physical fitness and to accomplish that I regularly go to the gym for fitness training. I am also part of my school track and field team. Being the fastest sprinter in the school since 11th grade the 100m, 200m and 400m races are my specialty even though I still pursue long distance running. In my spare time I explore and master the computer as I am conversant with a Visual Basic Programming course. It is imperative for me to have the latest hardware and software and I make it a point to install everything myself. I also learn Urdu as it is my native tongue and a link to my culture, to maintain that is crucial.

  Living in a diverse international community of over 52 nationalities has allowed to me recognize and appreciate different cultures. With the experience I have and the strong motivation to craft a bright future I feel I can justify my decision to pursue a career in Accounting and Finance or Management.

  Yours sincerely,

  shenqing/

  在平时不需要坐车步行就能到达目的地的出自哪个,大家要关注的安全有两方面,首先就是注意交通,日本交通比较拥挤,要随时注意周边的车况。

  然后就是防止尾随,人多拥挤很有可能会隐藏一些不怀好意的人,一方面要注意自己的钱财安全,另一方面还需要注意人身安全,防止猥亵和骚扰的情况。

  从直接住处,不管是学校宿舍还是自己租的房子,一般到车站,都是会有一定的距离的,这段距离内,也有可能会隐藏有危险,因为固定的路线非常方便别人踩点。

  在这样的情况下,大家需要进行自保,可以结伴出行,或者带上基本的防身工具,在必要的情况下进行反抗也有工具可以依靠。

  而车站周边,如果比较繁华,平时人比较多还好,如果是比较荒凉的地方,一定要看看好周边的情况,尽量避免自己一个人独处,不然会有可能有危险。

  此外大家还需要熟悉一般的电车或者地铁内的安全设施的摆放位置,这样在遭遇突发事件的时候,可以及时的反应过来,进行自救。

  最后,如果大家有能力的话,可以买一辆车作为代步工具,而自己驾车,需要了解的事情会更多,要对交通规则进行熟悉和了解,并且严格遵守。

  日本是亚洲国家,虽然受到西方的影响,但是本质上还是东方国家,日常用餐还是使用筷子的,而且由于对文化和传统非常重视,如果筷子用得不好是会被嘲笑的。

  毕竟作为一个筷子使用有着悠久历史的国家,如果在这点上和国内都做不好,本地的学生会对你产生不好的印象,虽然可能不会说出来,但是会慢慢的和你产生隔阂。

  在日本,通常会采用分食制度,即每个人拥有自己的一份事物,这里面就包括了米饭、菜、汤、酱菜等东西,而大家在吃饭的时候,至少要保证自己拿起一个碗,端着碗吃饭。

  而这里的碗不仅包括小一点的碗,也会有大一点的盘子,这是一个基本的礼仪,尤其是在和其他人一起吃饭的时候,一定要注意这一方面,会更有助于大家融入。

  日本的拉面非常的受欢迎,大街小巷中,拉面馆无处不在,而当你走进一家面馆的时候,你会发现除了大家交谈的声音之外,还会有此起彼伏的吃面的声音。

  这些声音不是不礼貌,恰恰相反吃面的时候不发出声音才是不礼貌,而且声音越大,代表你越喜欢这家店的面,会极大地鼓励这家店的店主,周围的人也会觉得你很懂文化。

  大家在看日本的电影或者电视剧的时候,吃完之后会说谢谢款待,这是对食物和款待表示感谢的说法,这是对食物和款待表示感谢的说法,是值得我们进行学习的。

  而大家到了日本之后,尤其是和其他人聚餐吃饭的时候,也需要入乡随俗说这两句话,保证自己的礼貌得到展现。

机械工程专业留学申请书【篇5】

  Dear _,

  An experienced engineer of security printing with China’s Central Bank, I now would like to scale higher intellectual heights by pursuing Ph. D. studies in mechanical engineering at your university. I believe that my strong background in CAD has adequately prepared me to embark on this endeavor.

  I have been working since for the People’s Bank of China, a Chinese version of the Federal Reserve, at its unique research institute of security printing, with the responsibility of designing the Chinese currency and the machinery to produce it. By engaging me in a variety of projects, the job afforded me ample exposure to cutting-edge developments in computer technologies, particularly in CAD software. I have, for example, recently redeveloped a purchased CAD (Computer Aided Design) software to make it more suitable for our own purposes. By adding our own part/subassembly to the database and make our own drawing criteria, we have achieved dramatically better efficiency.

  My job performance, which has won me professional respect from all of my colleagues, was achieved thanks to the strong background I acquired as a student in computer science. My undergraduate GPA ranked first among the 63 students of classmates in mechanical department, for which I was awarded first-class and second-class prizes many times. My graduate GPA ranked among the top 4% of the 105 students in my year, which won me the “San Hao” scholarship every year during the three years of my graduate studies.

  Unlike many other Chinese students, who are content with performing well in exams, I made a point of learning through my own hands-on experiences. In the Master’s program at the Beijing Institute of Printing, I gained an in-depth understanding of artificial intelligence, including expert system and genetic algorithm, especially in neural network. For my thesis, I programmed a multi-level BP neural network with C language to analyze my mathematical model, and applied much of my knowledge in optimization. I thus became able to program with a host of different computer languages, especially C++, with which I helped my graduate advisor to design a paper-cutting machine. To analyze the mechanism statically and dynamically, I programmed a software system to analyze and emulate it on screen. In undergraduate studies, I had often programmed with Fortran77 and the Basic language.

  Upon the completion of my Master’s studies, I easily passed the doctoral record examination in CAD/CAM of Beijing University, one f the top universities in China. But I gave up the opportunity in order to gain more practical experience in the industry. The decision proved to be right, as it guaranteed me better access to sophisticated facilities, such as state-of-the-art personal computers. With the People’s Bank of China, I have thus accumulated solid expertise in many kinds of operating and application software systems, particularly in CAD. I now have a firm grip on the latest developments in computer science in China.

  The challenges I met and the successes I achieved at the People’s Bank have not only endowed me with confidence but also fired off my desire to further improve myself. I have enjoyed high-quality and efficient production with the use of a kind of PC-based CAD software, MDT, developed by Autodesk Corporation. I now have a dream: some day, every person can design his favorite product with some sort of CAD software, and then search for an ideal factory over high-speed internet its production; and the factory will put specifications of the product, as it has received them via the high-speed internet into its CIMS, and out pops the product, as designed, at the end of the factory’s production line. It is a beautiful dream for every engineer, but many difficulties the speed of data-transfer and how to manage the product data among CAD, CAM, CAPP and CAE systems. These questions are fascinating, and I would like to come up with my own answers to them.

  To prepare myself for advanced studies in your country, I have persisted in improving my English proficiency. As demonstrated by my score of 700 (96%) in the verbal section of GRE, I now have an adequate command of English for undertaking graduate studies in your program.

  After carefully comparing the strengths of many universities, I find Mercy University particularly suited for my purpose. It has got the best combination of quality faculty, many state-of-the-art facilities, and an intriguing academic environment. Currently, China still lags significantly behind Western countries in mechanical engineering. I hope that, with a few years of graduate studies under your seasoned guidance, I will be able to return to my motherland and help bring mechanical engineering in my country to international standards.

  Although my ultimate objective is a Ph. D. degree, I am willing to do a Master’s degree if necessary. In either case, I would like to concentrate my studies in one or a combination of the following areas: CAD, CAM, CIMS, Computer graphics, Mechanical design, Mechanical manufacturing, Optimization, Artificial intelligence, and Robotics. Your favorable evaluation of my application will be highly appreciated.

  澳大利亚留学贷款怎么办理呢?

  【解答】1、到移民局认可的银行办理:

  澳大利亚移民局认可的金融机构有6家:中国银行、中国工商银行、中国建设银行、中国农业银行、中信实业银行和上海浦东发展银行。

  2、符合留学贷款的基本条件:

  笼统意义上说,适合申请贷款的人范围很广。银行有关部门介绍,申请留学贷款的借款人都必须是具有完全民事行为能力的中国公民,有合法的身份证件,在固定住所、稳定职业和收入来源,提供就读学校的《录取通知书》或《接收函》,提供就读学校开出的学习期内所需学杂费生活费的证明材料,还要提供贷款人认可的资产抵、质押或具有代偿能力并承担连带责任的第三方借款人(一般为借款人父母),并且借款人已拥有受教育人所需的一定比例的费用,同时落实贷款人规定的其他贷款条件、提供质押物的相关证件材料。

  3、留学贷款的申请人:

  你自己,配偶,父母,兄弟姐妹,祖父母;叔叔/舅舅,姨/姑(必须是澳大利亚公民,澳大利亚永久居民或久居澳大利亚的新西兰公民)

  4、申请步骤(以中国人民银行为例):

  第二步:银行对贷款进行审核。银行贷款人在收到借款人的申请材料后,在7个工作日内就会作出答复;

  第三步:如果银行同意贷款,银行将同意贷款的金额、期限、利率和偿还计划通知借款人;

  第四步:银行与借款人和担保人签订借款合同和担保合同并办理有关贷款手续。(注:贷款期限一般为一至六年,最长不超过十年。贷款限额:原则上不超过受教育人在校就读期间所需学杂费和生活费用总额的80%。最低为1万元,不超过50万元。)

  5、注意事项:

  1)在递交签证申请时一定要向移民局同时提供三份贷款材料,他们是:个人留学贷款证明书(Certificate of Creditability Personal Loan for Study Abroad);个人存款证明书(Certificate of Deposit);贷款合同(Loan Contract);

  2)以上三份材料需提供中英文,有的银行不能提供中英文材料的时候,需要经过具有NAATI资格的人士翻译方才有效;

  3)贷款的期限一定要覆盖整个学业期限;

  4)移民局对于还款的方式并不是十分在意,所以大家可以根据自己的实际情况选择最合适的还款方式;

  5)办理贷款的情况下,收入证明也十分重要。

  体检安排在拿到学校发放了电子录取之后,因为这个时候基本上可以确定自己的录取状态,拥有了准留学生的身份,然后大家再去指定的医院接受体检。

  不能够太早的去体检,因为体检报告的有效期只有三个月,过期就作废了;也不能够太迟,可能会影响大家的正常时期流程,耽误自己的安排,从而影响大家的行程。

  不能够自己随便找一个医院进行体检,因为体检报告可能会不受认可,大家一定要进入使馆的查看受认可的医院名单,然后选择最近的医院去检查即可。

  在前往医院之间,可以提前打电话预约一下时间,工作人员还会告诉你需要携带的材料,以及体检之前的注意事项,大家一定要听从他们的指导。

  去澳洲的体检项目都是最常规的,大家只需要接受身高、体重、视力、心肺和尿检即可,如果申请医学或者教学相关相关的专业,还需要进行血液项目的检查,没有其他的要求。

  一般情况下,体检的结果第二天就可以拿到手,大家直接前往医院的相关窗口领取即可,如果结果出现差错或者非正常状态的话,可以申请再次体检或者复核,需要在3个工作日内递交申请。

  体检前应该注意自己的休息,保持充沛精神体力,不要熬夜,因为可能会影响最后的检查结果。

  体检前三天应该保持清淡饮食,勿饮酒、忌油腻食物,清淡饮食才能够将饮食的影响降到最低。

  女学生应避开经期!这一点需要预估自己的生理期去预约时间,因为体检中有尿检的项目,经期会影响最终的检查结果。

机械工程专业留学申请书【篇6】

  一、衣

  奥地利的夏天气候是比较凉爽的,平均气温是十几度,的气温也可以达到三十几度,夏季的衣服你可以带休闲装、衬衫和外套。奥地利冬天的气温比较冷,在室内会有暖气提供,不过外面还是非常寒冷的,你还是带上你的羽绒服和薄的毛衣过来。奥地利的人他们穿着是很随意的,牛仔裤是他们经常穿的,他们不注重衣服是否高档,只要是整齐简洁就可以。如果你带够了衣服的话,就不用经常在这里买衣服,等到打折季再去买折扣就会有很多,买多了到时候回国的时候也带不了。

  二、食

  你在奥地利读书可以去学校的食堂吃饭,或者是在你住的地方做饭也可以,学校的食堂会给学生补贴,自己做饭的购买食材的成本要少很多。如果是几个好朋友一起聚餐的话,其实费用不是很多,因为如果是AA的话分到每个人的费用是很少的。在奥地利学校的食堂吃饭首先要买票,学生持有学生证可以有优惠价。在奥地利的超市有亚洲的食品,吃不习惯奥地利的美食的学生可以自己来做饭,食品的价格也不贵。

  三、住

  在奥地利住宿都是要申请的,你可以申请到离学校很近的房子,环境都还不错,单人房的价格是要比单人房的价格要贵的,里面还有很多公共设备是一起用的。很多的学生就是因为没有住到学校的宿舍才开始在外面租房的,租的房子一定要找距离学校很近的房子,这样上下学也很方便,不好的一点就是学校附近的房子都还挺贵的。

  四、行

  在奥地利人们出行大多数的都会坐地铁,因为地铁是不用担心会堵车的,而却还比较安全。要是你平时不赶时间的话可以坐坐公交,欣赏一下奥地利的美景。你要提前去办公交卡,乘车也会比较方便,不用再排队去买票了,而且对于学生来说还有优惠价。

机械工程专业留学申请书【篇7】

  一、加拿大留学机械工程专业课程设置:

  主干课程工程力学、工程图学、机械设计、机械制造技术基础、机电传动控制、测试与传感技术、先进制造技术、机械系统设计、机电控制系统分析与设计等。

  二、加拿大留学机械工程专业职业前景:

  就业方向:毕业生可在有关企业、科研单位、国家机关和高等院校从事机电产品设计、制造、管理、营销、科研和教学等工作。

  三、加拿大机械式程专业大学排名:

  3、不列颠哥伦比亚大学 University of British Columbia

机械工程专业留学申请书【篇8】

  留学加拿大机械工程是以有关的自然科学和技术科学为理论基础,结合生产实践中的技术经验,研究和解决在开发、设计、制造、安装、运用和修理各种机械中的全部理论和实际问题的应用学科。机械工程的服务领域广阔而多面,凡是使用机械、工具,以至能源和材料生产的部门,无不需要机械工程的服务。加拿大作为资源型发达国家,毗邻美国,机械工程专业在各种领域(如石油,天然气,木材,航空航天,能源,汽车等)都有颇多涉及,是集机械、电子、信息技术为一体的`综合性专业,培养的学生知识面宽,思路开阔,具有较强的创新意识和工作能力,适应面广、发展潜力大,是个发展迅速、需求巨大的热门专业。机械工程师一直高居加拿大各类人才需求的top5.而作为这一行业的从业人员,毕业生需要在加拿大各省或地方的专业工程师协会登记,并经审核后获得由工程师协会颁发的专业资格证书。无论选择在国外发展还是回国效力,在发达国家积累的同行业工作经验都将是留学生的宝贵财富。

  主干课程工程力学、工程图学、机械设计、机械制造技术基础、机电传动控制、测试与传感技术、先进制造技术、机械系统设计、机电控制系统分析与设计等。

  就业方向:毕业生可在有关企业、科研单位、国家机关和高等院校从事机电产品设计、制造、管理、营销、科研和教学等工作。

  机械工程师主要在专业顾问公司、电力行业、生产及加工行业、运输行业工作。

用户评论

◆残留德花瓣

终于找到了一份高质量的機械工程留学申请范文!之前一直担心自己的材料写不好,这下心里踏实了。

    有11位网友表示赞同!

话扎心

这个機械工程留学申请攻略写的真详细!各个步骤都清晰易懂,简直是小白福音!

    有16位网友表示赞同!

别悲哀

我想去加拿大读机械工程,这篇范文里提到的学校很多都是我感兴趣的,这篇文章让我更有方向感了。

    有16位网友表示赞同!

我没有爱人i

作为一个已拿到 offer 的機械工程专业的学生,我觉得那些分享经验的文章很实用,申请过程的确不容易啊。

    有18位网友表示赞同!

淡写薰衣草的香

这个攻略讲了很多我没注意到的小细节,比如推荐信的要求和面试技巧,太值了!我已经开始按照他们的步骤准备申请材料了。

    有19位网友表示赞同!

断桥残雪

机械工程是热门专业,竞争很激烈,这篇指南帮我理清思路,让我更加了解自己应该做什么来提高申请成功率。

    有5位网友表示赞同!

孤败

说句实话,我觉得这个范文写的有点流水账,缺少个性化特色的表达,这样很难引起招生办的认可吧。

    有12位网友表示赞同!

陌颜幽梦

机械工程留学申请 really needs a lot of time and effort. I started preparing months ago, but still feel overwhelmed. Does anyone have any other tips?

    有10位网友表示赞同!

无所谓

我觉得这篇范文太注重硬性数据了,缺乏对个人兴趣和动机的描述,申请就是为了展现你自己吧!

    有20位网友表示赞同!

半梦半醒i

对于机械工程的学习,我对理论研究更感兴趣,希望能够找到一个实验室进行学术合作。这段话应该怎么写得更加突出我的研究方向呢?有没有人有经验可以分享?

    有17位网友表示赞同!

艺菲

我觉得这个攻略忽略了学生自身的差异性,机械工程下有很多不同的专业方向,不能一概而论,建议针对不同的方向给出更具体的指导。

    有12位网友表示赞同!

抓不住i

申请留学本来就压力大,这篇攻略给我增加了负担,我需要整理一下思绪,再一步步来,不要给自己太大压力。

    有11位网友表示赞同!

优雅的叶子

机械工程真的是一个令人着迷的领域,我希望能够在这个领域里有所贡献。 现在我正在认真学习英文和相关专业知识,努力让自己更胜一筹!

    有9位网友表示赞同!

顶个蘑菇闯天下i

这个攻略很注重细节,让我意识到申请过程中很多方面都需要精心准备。我已经开始着手修改我的简历和个人陈述了!期待能早点收到心仪学校的录取通知书!

    有17位网友表示赞同!

嘲笑!

我觉得这篇范文写的真不错,语言简洁易懂,重点突出,尤其是那段关于推荐信的要求的阐述,对我非常有帮助。建议大家认真阅读!

    有5位网友表示赞同!

蝶恋花╮

这个攻略让我意识到申请留学还有很多需要学习的地方,我会继续深入了解各个学校的录取要求和申请流程,希望能够顺利完成我的留学梦。

    有19位网友表示赞同!

关于道别

机械工程留学确实不容易,竞争激烈,但是只要我们认真准备,付出努力,一定有机会实现目标! 加油!

    有20位网友表示赞同!

相关推荐